JL/JLU-JK/JKU: Delta Brake Kit Front and Rear 8x6.5 Inch Bolt Pattern For 07-18 Jeep JK/JKU Wrangler, For 19-Current Jeep JL/JLU, 2020-Current Jeep JT Gladiator

$2,553.99

SKU: 4403480

The TeraFlex Delta Brake System is the ultimate upgrade for JL and JK Wrangler/Unlimited and JT Gladiator models with oversized and heavier wheels/tire combos requiring increased braking performance. A must for 33-42 inch tires or heavy-laden overland rigs. Includes all the components required to upgrade both front and rear axles.

Delta Brake Calipers feature a high-modulus bridge. Modulus measures a material's resistance to elastic (recoverable) deformation under load. A stiff material has a high modulus, which means it only changes shape slightly under high elastic loads before returning to its normal shape.
Fits:

  • JL Wrangler (2-door)
  • JL Wrangler Unlimited (4-door)
  • JK Wrangler (2-door)
  • JT Gladiator (pickup)
  • JK Wrangler Unlimited (4-door)

Specs:

  • Minimum Wheel Diameter: 17 inch
  • Back Spacing: 4.75 inch or less
  • Bolt Pattern: 5x5 inch
  • Install Time: 4 Hours

Includes:

  • High-Modulus Brake Caliper Kit with Pads - Front (part number 4403401)
  • High-Modulus Brake Caliper Kit with Pads - Rear (part number 4403402)
  • 14 inch X 1.25 inch Vented and Slotted Rotors with 5x5 inch - Front (part number 4403485)
  • 14 inch X 1.25 inch Vented and Slotted Rotors with 5x5 inch- Rear (part number 4403486)
  • All necessary hardware

Delta Brake System Features:

  • Significantly improved braking performance over factory brake system
  • 100 percent bolt-on upgrade with basic hand tools
  • Balanced front to rear brakes tuned specifically for lifted vehicles
  • Brake bias and piston sizes optimized for JL and JK Wrangler/Unlimited and JT Gladiator models
  • Designed to work with stock proportioning valve and ABS
  • 3-year warranty

High-Modulus Brake Calipers Features:

  • Opposed 4-piston caliper design with 2 inch front pistons and 1.375 inch rear pistons
  • Same flow rate as factory 2-piston calipers - 4 pistons move each side half the distance instead of 2 pistons only moving one side the full distance
  • EPDM synthetic boot material keeps water and other contaminants away from piston
  • Hard-chrome coating on piston reduces friction to improve performance
  • 4-piece High-Modulus bridge caliper design combines heat-treated 4140 cast steel bridges with 6061-T6 forged aluminum piston housings
  • Steel bridges resist bending/flex better than standard aluminum or cast iron
  • Improved stiffness = consistent brake feel/modulation during brake application and release
  • Low-profile bridge accepts 14 inch diameter rotors behind 17 inch wheels
  • 1,000-hour salt spray tested zinc- and E-dipped coating on bridges and mounts
  • 300,000 psi steel formed hardware
  • Calipers feature built-in auto bleeding check ball, valve, and spring for easy bleeding
  • Hard-coat anodized, scratch-resistant piston bores

Brake Rotors Features:

  • Massive 14 inch x 1.25 inch vented rotors for superior stopping performance
  • Larger diameter rotors offer more mechanical advantage for more stopping power
  • Heat-treated, heavy cast-iron rotors offer better heat absorption
  • Mill-balanced, vented rotors for maximum heat dissipation
  • Included slotted rotors offer better gas dissipation than smooth rotors
  • Geomet coating on non-friction surfaces resists corrosion

Brake Pads Features:

  • Proprietary composite-resin, semi-metallic pads provide excellent full temperature stopping power for maximum initial speed scrub with increased pad life and reduced noise and dust
  • Drop-in pad design - no need to disassemble calipers to replace pads

Stock Brake Rotor Reference:

  • JL Sahara/Rubicon front: 12.9 inch x 1.1 inch (330mm x 28mm) vented rotors
  • JL Sahara/Rubicon rear: 13.4 inch x 0.55 inch (342mm x 14mm) solid rotors
  • JL Sport front: 12.9 inch x 0.94 inch (330mm x 24mm) vented rotors
  • JL Sport rear: 12.9 inch x 0.47 inch (328mm x 12mm) solid rotors
  • JK front and rear: 11.9 inch x 1.1 inch (302mm x 28mm) vented rotors (U.S.-spec)

Notes:

  • Requires a minimum wheel diameter of 17 inch.
  • On JK models, we recommend upgrading the stock master cylinder and brake booster to the Mopar Master Cylinder and Brake Booster Kit (part number P5160050).