Jeep JL Piggyback Shocks Falcon SP2 3.3 Fast Adjust 2-4.5 Inch Lift All 4 For 10-Pres Wrangler JL 2 Door TeraFlex

$1,971.99

SKU: 10-02-33-400-200

Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability with their easy to use 3-position Fast Adjust Knob. Settings include Soft, Custom, and Firm. The Custom setting incorporates an 8-Position Dial for more precise tuning.

High-Value Performance is the driving force behind our vehicle-specific dampers for Jeeps, trucks, and SUVs. These Jeep-specific shock absorbers deliver increased stability, improved ride quality, and comfort for daily driven vehicles as well as race-inspired performance, handling, and stability for off-road rigs. Falcon Performance Shocks by TeraFlex.
Fits:

  • JL Wrangler (2 Door)
  • 2-4.5 inch Lift

Includes:

  • SP2 3.3 Fast Adjust Piggyback Shocks - all 4
  • Rear roost guards - pair
  • All necessary hardware

Features and Benefits:

  • SP2 3.3 Fast Adjust Piggyback Shocks:
    • SP2 3.3 Fast Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
    • Fast Adjust Knob w/ 3 compression settings for large damping adjustments
    • Settings include: Soft, Medium, Firm
    • Custom setting includes an 8-Position Dial for finer damping adjustments
    • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
    • Ideal for daily driven Jeeps as well as the serious enthusiast wanting to adjust damping for all driving conditions
  • JL Falcon Shocks:
    • JL corner-specific shock absorber w/ race-inspired performance
    • Front lower offset eyelet design provides maximum shock body to frame clearance during articulation
    • Rear roost guards prevent shock shaft damage from rocks kicked up by the tires
    • SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
  • Falcon Series 3 Piggyback Shocks:
    • Piggyback design increases oil and gas capacity for reduced heat
    • Flows 6x more oil than restrictive reservoir hose designs
    • Eliminates common leakage issues found in banjo and swivel fittings
    • Front shocks' unique horizontal piggyback reservoir increases tire clearance
    • Cartridge Upgrade Kits are available separately
  • SP2 Mode Adjust Shocks:
    • Choose between Soft and Performance modes during install
    • Tunes both compression and rebound
    • Soft mode allows a partial bypass of the main piston for a softer ride
    • During aggressive driving, Soft mode retains performance tuning for optimal handling
    • Soft mode recommended for rough terrain/surfaces and cold weather
    • Performance mode recommended for max on- and off-road handling, stability, and control
  • Falcon Performance Shocks (All):
    • Vehicle-specific shock absorbers
    • Race-inspired performance for increased vehicle stability
    • Improved dynamic roll control and low-speed damping
    • Dramatic improvement in on-road comfort and off-road performance
    • Optimized fitment for unobstructed suspension travel and articulation
    • 2.25 inch shock body provides optimal performance
    • 6061-T6 aluminum alloy shock body resists Impact to protect internal components
    • Smooth honed internal shock body surface for long-term performance
    • 3/4 inch induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
    • Large shaft diameter provides a wide range of adjustment on adjustable shocks
    • Hard anodized 6061-T6 aluminum alloy billet piston
    • 1-piece Teflon bronze piston wear band w/ O-ring
    • VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
    • VOD reduces shock bottoming at full compression or over uneven terrain
    • OGS (Oil/Gas Separator) prevents cavitation
    • High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
    • Synthetic formula also contains special anti-wear and lubricity agents
    • 1,000-hour salt spray corrosion resistance test on all hardware
    • Serviceable and rebuildable (factory serviced)
    • Designed, engineered, and assembled in-house from domestic and globally sourced components
    • Patented design
    • 3-year warranty

Note(s):

  • Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders - See instructions for proper configuration for your application.
  • May require 2 inch Bump Stop Strike Pad Extension Kit (part number 1959500) and/or 0.5 inch Bump Stop Strike Pad Shim Kit(s) (part number 1959300).
  • Install Time: 1.5 Hours